Data Sheet

PRX825W
Features:
< Maximum SPL Output 138 dB Peak
< Dual 15” Differential Drive
®
low-frequency drivers for
low-distortion and higher SPL
< 1.5” diameter next generation JBL neodymium
compression driver
< 1500W (dual 750 watt) highly efcient Class-D
amplier
< Normal and Boost user selectable EQ presets
< DSP input section, crossover, dynamic limiting,
component optimization, selectable system EQ
< Wireless remote control of its onboard DSP EQ
parameters via Wi-Fi. Control and congure your
show from anywhere.
< Professional XLR-1/4” combination inputs, RCA
inputs, and XLR loop-through
< Integrated 9 x M10 suspension points
< Lightweight poplar plywood cabinets made structurally
sound with tongue and groove joints and protected by
JBL’s tour proven DuraFlex™ nish
Application:
< If a simple set-up is required and full bandwidth
output at high levels is a must, then the PRX825W is
most likely the optimum solution. With the same foot
print as the PRX815W, the dual 15” woofer design
creates enough low frequency content to serve most
live music or music playback situations. When coupled
with a PRX subwoofer (or multiple subwoofers) the
system becomes a high volume sound reinforcement
solution, perfect for regional tour companies and
AV Rental companies looking for a scalable, easy to
employ audio solution. We recommend using the
PRX818XLFW in conjunction with the PRX825W
as the extended low frequency capabilities of the
subwoofer compliment the frequency response of the
PRX825W.
< For live music, recorded music playback and speech
the user has the option of tailoring the EQ. A
microphone can be directly connected to the speaker
input for quick on-the-y PA applications.
< The PRX825W is a self-powered, lightweight two-
way loudspeaker system with remote Wi-Fi control
of onboard DSP EQ parameters. The PRX825W is
capable of delivering a very high level of performance
over a wide bandwidth. The PRX825W is comprised
of two 380 mm (15 in) 275 Differential Drive
®
woofers, a 2408H-2, 37.5 mm (1.5 in) annular polymer
diaphragm, neodymium compression driver mounted
to a 90° by 50° horn, all driven by a Class-D power
amplier. Sophisticated DSP is at the core of a fully
featured input section, providing user selectable
system EQ, protection, input sensitivity selection,
cross-over functionality, dynamic limiting and discrete
component optimization.
< All PRX800 cabinets are built from a combination
of 25 mm (on the top and bottom for added rigidity)
and 18 mm, strong, light-weight poplar plywood made
structurally sound with tongue and groove joints.
All PRX800 Series cabinets are protected by JBL’s
tour proven DuraFlex™ nish. Grilles are made
from dent-resistant 16 gauge steel and handles are
made from light-weight glass-lled nylon for added
strength and durability. All M10 suspension points are
constructed from 14 gauge steel and have been tested
with a yield-strength of 1000 lbs. each.
< The amplier input panel offers XLR or ¼ inch jack
compatibility and a sensitivity switch provides extra
exibility, making it possible to connect literally any
sound source without using a mixer. Signal present
and overload lights indicate the system status and
assist in setting the optimum level, via the level
control knob.
Specifications:
System:
System Type: Self Powered Dual 15”, two-way, bass-reex
Maximum SPL Output: 138 dB peak
Frequency Range (-10 dB): Normal: 46.2Hz–16.5 kHz
Boost: 46 Hz – 18.3 kHz
Frequency Response (±3 dB): Normal: 52.6 Hz –17 kHz
Boost:51.8Hz– 17.5k
Input Connectors: 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
Input Impedance: 20K Ohms (balanced), 10K Ohms (unbalanced)
Signal Indicators: Limit: Yellow LED indicates peak output has been reached and
dsp limiter is acting
Signal: Green LED indicates signal present
Power: Blue indicates system has power and ready to pass audio.
EQ: User selectable presets for Normal or Boost, Advanced EQ
settings available using Wi-Fi and PRX Connect application
Dynamic Control (Input): dbx Type IV™ limiter circuit
Crossover Frequency: 2.4 kHz
Amplifier:
Design: Highly efcient Class-D amplier
Power Rating: 1500W (750W x 2)
AC Power Input: 100V - 240V ~ 50/60 Hz
Speaker:
LF Driver: 2 x JBL 275 (15 in) woofer
HF Driver: 1 x JBL 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm,
neodymium compression driver
Coverage Pattern: 90° x 50° nominal
Directivity Index (DI): 10.4 dB
Directivity Factor (Q): 11
Enclosure: Trapezoidal, 18 mm, plywood
Suspension / Mounting: 8 x M10 Suspension Points, 1 x M10 pull back point
Transport: 2x integrated handles with injection molded backing cup
Finish: Obsidian DuraFlex™ nish
Grille: Powder coated, Obsidian, 16 gauge perforated steel with acoustical
transparent black cloth backing.
Dimensions (H x W x D): 1061 mm x 446 mm x 539 mm
(41.8 in x 17.5 in x 21.2 in)
Net Weight: 37.19 kg (82.0 lb)
Gross Weight: 43.0 kg (95.0 lb)
JBL continually engages in research related to product improvement. Some materials, production methods and design renements are
introduced into existing products without notice as a routine expression of that philosophy. For this reason, any current JBL product
may differ in some respect from its published description, but will always equal or exceed the original design specications unless
otherwise stated.
Dual 15” Two-Way
Full-Range Main System