P R X 8 1 2 W P R X 8 1 5 W User ’s Guide P R X 8 1 5 X L F W P R X 8 1 8 X L F W P R X 8 2 5 W P R X 8 3 5 W
CONTENTS IMPORTANT SAFETY INSTRUCTIONS...................................................3 PRECAUTIONS.........................................................................................4 SUSPENSION OF LOUDSPEAKER SYSTEMS.......................................5 WATCH FOR THESE SYMBOLS..............................................................7 PRX800W SERIES SPEAKERS DECLARATION OF CONFORMITY......8 THE PRX800W SERIES POWER AMPLIFIER.........................................
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
PRECAUTIONS The PRX800W Series speakers covered by this manual are not intended for use in high moisture environments. Moisture can damage the speaker cone and surround and cause corrosion of electrical contacts and metal parts. Avoid exposing the speakers to direct moisture. Keep speakers out of extended or intense direct sunlight. The driver suspension will prematurely dry out and finished surfaces may be degraded by long-term exposure to intense ultra-violet (UV) light.
SUSPENSION OF LOUDSPEAKER SYSTEMS Are You New to Rigging? If you are new to rigging, you should do the following: • Read and study JBL Technical Note Volume 1, Number 14: Basic Principles for Suspending Loudspeaker Systems (available at http://www.jblpro.com/catalog/support/getfile.aspx?docid=296&doctype=3). • Know the rules for safe rigging.
Resources Adaptive Technologies Group 562.424.1100 1635 E. Burnett Street Signal Hill, CA 90755 www.adapttechgroup.com McMaster Carr Various locations in the USA For a location near you, visit them at www.mcmaster.com JBL Professional - Tech Note Vol. 1 No. 14 “Basic Principles for Suspending Loudspeakers” www.jblpro.com/catalog/support/getfile.aspx?docid=296&doctype=3 Safe Rigging JBL suspendable version loudspeakers are supplied with built-in internal brackets.
WATCH FOR THESE SYMBOLS The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated “Dangerous Voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (Servicing) instructions in the literature accompanying the product.
PRX800W SERIES SPEAKERS DECLARATION OF CONFORMITY Safety and EMC Compliance Specifications EN 55103-1:1997 Electromagnetic Compatibility - Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control Apparatus for Professional Use, Part 1: Emissions EN 55103-1:1997 Magnetic Field Emissions-Annex A@ 10 cm and 20 cm EN 55022:2003 Limits and Methods of Measurement of Radio Disturbance Characteristics of ITE: Radiated, Class B Limits; Conducted, Class A EN 55103-2:1997 Electromagnet
THE PRX800W SERIES POWER AMPLIFIER AC Power Requirements Standard PRX800W Series speaker systems are equipped with a multi-channel Class-D power amplifier and loudspeaker-specific DSP electronics and require appropriate AC power. Before plugging a PRX800W speaker into an outlet, ensure that it is able to provide the appropriate AC power as required by the speaker. A robust AC supply is necessary for maximum performance.
INTRODUCTION TO THE PRX800W SERIES PRX812W PRX815W PRX815XLFW PRX818XLFW PRX825W PRX835W Thank you for choosing the JBL PRX800W Series self-powered PA loudspeakers. The PRX800W Series represent an evolutionary step in the efficient use of amplifier power, rugged durability and enhanced versatility in a self-powered loudspeaker with WI-FI application configuration and control.
Powered Speaker Systems A Closed System Architecture… There is much confusion these days in the world of powered speakers, especially when it comes to defining “performance”. What constitutes “exceptional performance”? Is it wattage ratings, driver dimensions, cabinet dimensions, sound pressure levels, tone? It can get very confusing when you’re confronted with a barrage of specifications from manufacturers all claiming to have the “best performance”.
SYSTEM SPECIFICATIONS Full-Range Models PRX812W PRX815W PRX825W PRX835W Self powered two-way 12” woofer 1” exit compression driver, bass-reflex Self powered two-way 15” woofer 1” exit compression driver, bass-reflex Self powered two-way 15” woofer 1” exit compression driver, bass-reflex Self powered three-way, 15” woofer, 6.
SYSTEM SPECIFICATIONS Subwoofers PRX815XLFW PRX818XLFW Self powered 15”, bass-reflex Self powered 18”, bass-reflex 131 dB 134 dB Frequency Range (-10 dB): 36 Hz – 113 Hz 30 Hz – 103 Hz Frequency Response (±3 dB): 40 Hz – 91 Hz 35 Hz – 87 Hz Input Connectors: Two Balanced female XLR/ 1/4” combo connectors Two Balanced female XLR/ 1/4” combo connectors Input Impedance: 20K Ohms (balanced) 20K Ohms (balanced) Signal Indicators: Limit: Yellow LED indicates input is clipping or peak output h
SYSTEM SET UP – FULL RANGE MODELS PRX800W Amplifier Input Configuration for PRX812W, PRX815W, PRX825W and PRX835W: 1 2 3 4 5 6 12 13 14 15 16 7 8 9 10 11 14 17 18
Features 1. SYSTEM EQ LED – This light indicates BOOST (PRX825W & PRX835W only) or MONITOR (PRX812W & PRX815W only). 2. SYSTEM EQ Button a. Normal and Boost (PRX825W and PRX835W only) – Default (light off) is NORMAL, frequency response is linear and unaltered. When light indicator is on, BOOST is selected and internal equalization is applied to enhance low frequency and high frequency response. b.
SYSTEM SET UP – SUBWOOFERS PRX800W Amplifier Input Configuration for PRX815XLFW and PRX818XLFW: 1 2 3 4 5 8 9 10 11 12 6 7 13 14 16
Features 1. POLARITY LED – This light indicates whether the polarity is set to Normal or Inverse Polarity. When the light is ON, speaker polarity is inverted. 2. POLARITY Button – This push button allows you to choose between 0° (Normal) or 180° (Inverse Polarity). The correct polarity setting will produce the best blend between the subwoofer and the full-range speaker and the strongest perceived bass response at the listening position. If the bass response seems weak, try inverting the polarity.
WI-FI SETUP To connect to the PRX800W speakers via WI-FI, perform the following: 1. Download the app from www.jblpro.com then install it. 2. Power on all PRX800W speakers in your setup. 3. The application will display a welcome screen — select “SET UP A NEW SYSTEM”. 4. Enter the name of the band and the name of the venue. 5. Select NEXT. 6. Go to the back of each speaker and set it to Access Point mode by pressing and holding the CONNECT button for 2 seconds — the CONNECT LED will begin flashing slowly. 7.
FACTORY RESETS The following Factory Resets will reset settings back to their factory default state. This can be useful when you wish to reconfigure a speaker from scratch. WARNING: Performing the following reset procedures will result in the loss of settings and cannot be undone! Factory Hard Reset The Factory Hard Reset resets all DSP and network settings back to their factory default state. To perform the Factory Hard Reset: 1. Turn the speaker power off. 2.
TROUBLESHOOTING Symptom Likely Cause Speaker not connected to active AC power. No sound. No sound, speaker is connected to working AC power but won’t come on. No sound. Speaker comes on. No sound with microphone connected directly to the MIC input. Verify that speaker is connected and that circuit is on. Switch on power and verify that illuminated logo is on. • Re-seat the power cable at both ends. • Substitute a known-good power cable. Blown fuse. Signal source (mixer, instrument, etc.
Symptom Likely Cause What to do Improper A/C grounding, ground loops. • “Telescope” the audio ground by using an XLR/F to XLR/M adapter on one end. • Re-route audio cable away from AC power and lighting cables. Excessively long unbalanced cable run. • Use the balanced outputs (if available) of your mixer or source equipment to drive your PRX800W speakers. • Use a “DI” (direct injection) box to convert your unbalanced equipment output to a balanced output. Improper system gain structure.
CONTACT INFORMATION Mailing Address: JBL Professional 8500 Balboa Blvd. Northridge, CA 91329 Shipping Address: JBL Professional 8500 Balboa Blvd., Dock 15 Northridge, CA 91329 (Do not return product to this address without first obtaining prior authorization from JBL) Customer Service: Monday through Friday 8:00am - 5:00pm Pacific Coast Time in the U.S.A. (800) 8JBLPRO (800.852.5776) www.jblproservice.com On The World Wide Web: www.jblpro.
WARRANTY INFORMATION The JBL Limited Warranty on PRX800W is in effect for three years from the date of the first consumer purchase. Who Is Protected By This Warranty? Your JBL Warranty protects the original owner and all subsequent owners so long as: A.) Your JBL product has been purchased in the Continental United States, Hawaii or Alaska. (This Warranty does not apply to JBL products purchased elsewhere except for purchases by military outlets.
PR X800W S Part Number: 5075810-A 9/16 E R I 8500 Balboa Boulevard Northridge, CA 91329 USA E S www.jblpro.