Installation Guide

3. Connect the quick connector on the other end of the

10’ (3.0 m) PVC flexible gas supply hose to the rigid Natural

gas supply pipe (B).

Change Grill Main Burner Valve Orifices

1. Remove the grates and flame tamers.

2. Remove the 2 screws that hold the burner in place. Set the

screws aside. Remove the burner from the grill by lifting the

burner out.

3. Use a 6 mm socket and wrench or 6 mm nut driver to remove

the brass orifice from the end of gas valve. The main burner

orifice is located behind the LP orifice, so no additional orifice

needs to be installed.

4. Reinsert the burner and reattach using the 2 screws

previously removed. Repeat the procedure for each main

burner.

5. Position the igniters so they are ¼" (6.0 mm) away from each

burner.

Change the Rotisserie/Infrared Burner Orifice

1. Using a Phillips screwdriver, unscrew the 2 screws and

remove the rotisserie/infrared burner wind baffle.

A. Brass connector

B. Quick connector

A. 2 screws

A. Main burner orifice

A. Wind baffle