User manual

Ducting Information

(Model CVE407 only)

Jenn-Air's ventilationsystem is designed to capture both cookingfumes andsmoke from

any place on the cooktop surface. If the system does not, these are some ducting

installation situations to check:

• 6" diameter round or 3 1/4" x 10" rectangular ducting should be used. Note: 5"

diameter round ducting may be used for venting straight out the back of the

cooktop and directly through the wall for 10' or less.

• No more than three 90° elbows should be used. Distancebetween elbows should

be at least 18".

• Recommended Jenn-Air wall cap should be used. Make sure damper moves

freely when ventilation system is operating.

• There should be a minimum clearance of 6"for cooktop installed neara side wall.

If there is not an obvious improper installation, there may be a concealed problem such

as a pinched joint, obstruction in the pipe, etc. Installation is the responsibility of the

installerandquestions should beaddressedfirst bythe installer. The installershould very

carefully check the ducting installation instructions.