User manual

Improper Cookware
Cookware that does not have flat bottoms.
Thin, uneven, grooved or rough bottom utensils.
Unbalanced cookware that does not rest flatly and evenly on solid element.
Cookware that extends more than 1 inch beyond the surface of the solid element.
Nonflat specialty items that are oversized, uneven or do not meet proper utensil
specifications such as round bottom woks with rings, griddles, rippled bottom
canners, lobster pots, large pressure canners, etc.
Note: Oversized utensils or woks equipped with round metal rings can discolor the
stainless steel rings.
CAUTION: If flat bottom pans are not used, the top may overheat and the glass
cooktop could break.
Home Canning
Acceptable canning pots should not be oversized and must have a flat bottom. When
canners do not meet these standards, the use of the HI heat setting becomes excessive
and may result in damage to the cooktop. In addition, water may not come to a boil and
canners may not reach 10 lb. of pressure.
The acceptable canning procedure uses the HI setting just long enough to bring the
water to a boil, then lower the setting to maintain the water temperature.
Characteristics of Utensil Materials
Heavy gauge utensils with flat, smooth bottoms will generally work similarly. There are
some differences in the cooking performance of various utensil materials.
Aluminum utensils heat quickly and evenly. Best suited for simmering, braising,
boiling and frying.
Stainless steel utensils will evenly distribute heat if constructed of tri-ply or com-
bined with other metals such as aluminum and copper. Use for cooking functions
similar to aluminum.
Cast iron utensils are slow to heat but cook more evenly once temperature is
reached. Use for long term low heat cooking or for browning and frying.
Glass ceramic, earthenware, heat-proof glass or glazed utensils can be used if
f recommended by the manufacturer for cooktop cooking. Do not use with trivets.
Best used on LO to MED temperature settings.
Porcelain enamel-on-steel or porcelain enamel-on-cast iron should be used
according to manufacturer's directions. Do not allow to boil dry.