Double Oven User Manual

Fifteenseconds later,the Display will returnto currenttime of day andthe Indicator
Word TIMED win appear in the Display.
8.Touch StopTime Pad.
Indicator Words STOP TIME will flash. Displaywill show the calculated stop time
based on current time of day and cook time.
Note: Probeset temperaturewill controlthe actual bake time. Probetemperature,
not stop time, will turn oven off when food is done. Stop time is programmedfor
the purpose of computing start time.
9. Touch the appropriate number pads to enter stop time.
A stoptime can only be acceptedfor later inthe day. Ifan unacceptablestop time
is entered, "Err" will flash briefly in the Display and then Display will return to
previous acceptable Stop Time.
Example: If at 10 o'clock you set the oven for a probe temperature, for 325°
convection roastingand 2 hoursand 30 minutes cookingtime, the calculated stop
time would be "12:30". The Display would show:
If you want the stop time to be 1 o'clock, touch the number pads "1,0,0". After
five seconds,the Displaywill briefly displaythe start time. Thus, the Displaywould
show:
!g:3g
After five seconds, the Display will return to current time of day, thus showing:
I 0:00
When selected temperature has been reached, the oven will shut off and a chime
will sound four times. Plus,the actual probe temperature will flash and the word
"End" will be in the Display. These words will remain in the Display and a chime
will sound every minutefor ten minutes or until the Cancel Off Pad is touched. If
the probe is not removed, a beep will sound continuously until the probe is
removed.
IMPORTANT ]
• To recall a selected temperature or time: Touch the appropriate function pad./
• To change oven temperature set: Touch appropriate pad and touch the/
appropriate number pads to enter new desired temperature.
• If more than five seconds elapse between touching a function pad and touching
a number pad, the on-go ng program returns to the D sp ay.
24