Installation Instructions

ManualsBrandsJenn-Air ManualsAppliancesRISE Style Stainless Steel Steel Right Swing Door Panel-Kit for JB36NXFXRE 36" Fully Integrated Built-In Bottom-Freezer Refrigerator

14 | INSTALLATION

12 | INSTALLATION

INSTALLATION

INSTALLING FREEZER PANEL

APPLIES TO:

1. Slightly loosen the bracket screws present on

freezer panel.

2. Slide panel onto drawer. Retighten the four

screws on each side attaching the bracket to the

drawer panel.

3. Using the Phillips-head ﬂat screws, fasten the

panel brackets to the drawer.

4. To allow for later adjustment of the panel, do not

fully tighten the screws attaching the bracket to

the drawer.

IMPORTANT: When you have completed

installing all the panels, check for alignment.

The drawer panel will move up or down to align.

Completely tighten the screws only when panels

are fully aligned.

2

3

1

FOR SIDE BY SIDE MODELS - SKIP THIS STEP!

14 | INSTALLATION

4

Parts to be used:

X6 Phillips-head screws