Installation instructions

5
INSTALLATION INSTRUCTIONS
Install the Oven
(24" [59.5 cm] Installation Only)
NOTE: For this oven, the door handle may be used for lifting. Do
not use any other portion of the control panel, side brackets, front
frame or trim for lifting.
1. Empty oven of any loose items.
2. Using 2 or more people, slide the oven all the way into the
opening.
3. Center the oven within the opening. Open the oven door.
4. Mark 4 holes (2 on each side) in the door facing frame of the
oven.
5. To avoid damage to the frame while drilling during the next
step, close the door and remove the oven.
6. Drill the 4 holes using ⁵⁄₆₄" (2 mm) drill.
7. With the oven near the opening, plug the oven into the
grounded 3-prong outlet.
8. Replace oven in cutout opening.
9. Open the oven door. The holes in the door facing frame
should align with the holes just drilled into the cabinet. Fasten
the microwave oven door facing to the cabinet using four 1"
T10 screws.
10. Proceed to “Complete Installation” section.
A. Door facing frame
B. Trim panel
C. 1" T10 screws (4)
WARNING
Excessive Weight Hazard
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
A
B
C
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING