Installation instructions

Exploded View of Panel Placement

13. Attach the side trim panel to the door facing frame using two

1" T10 screws.

14. Repeat steps 12 and 13 on other side.

Complete Installation

1. Check the steam oven by running the steam and convection

bake functions according to the Use and Care Guide.

2. If the steam oven does not operate:

■ Check that a household fuse has not blown, or a circuit

breaker tripped. Replace the fuse or reset the circuit

breaker. If the problem continues, call an electrician.

■ Check that the power supply cord is plugged into a

grounded 3 prong outlet.

■ See the Use and Care Guide for troubleshooting

information.

Installation is now complete.

Save these Installation Instructions for future use.

If you need Assistance or Service:

Please reference the “Assistance or Service” section of the Use

and Care Guide, or contact the dealer from whom you purchased

your built-in oven.

A. Door facing frame

B. Side bracket

C. Side trim panel in place

A. Door facing frame

B. Trim panel

C. 1" T10 screws (4)