Installation Manual
Table Of Contents
- Introduction
- VARIANTS AND ACCESSORIES
- INSTALLATION REQUIREMENTS
- INSTALLATION INSTRUCTIONS
- Introduction
- VARIANTES ET ACCESSOIRES
- EXIGENCES D’INSTALLATION
- Outils et pièces
- Dimensions du produit
- Dimensions pour l’ouverture des portes
- Préparation du site
- Exigences d’emplacement
- Spécifications de l’alimentation en eau
- Spécifications électriques
- Exigences d’installation de l’ensemble de panneaux en acier inoxydable
- Exigences d’installation et dimensions des panneaux de bois personnalisés
- INSTRUCTIONS D’INSTALLATION
- Déballage du réfrigérateur
- Déplacement du réfrigérateur dans le domicile
- Raccordement à la canalisation d’eau
- Brancher le réfrigérateur
- Installation des garnitures latérales
- Déplacement du réfrigérateur à son emplacement définitif
- Réglage de l’aplomb et alignement du réfrigérateur
- Installation de la grille de la base
- Terminer l’installation
6
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
IMPORTANT:
Installer: Leave Installation Instructions with the
homeowner.
Homeowner: Keep Installation Instructions for future
reference. Save these Installation Instructions for the
local electrical inspector’s use.
TOOLS NEEDED:
Gather the required tools and parts before starting
installation.
Read and follow the instructions provided with any tools
listed here.
Cordless drill
Drill bits
Adjustable wrenches (2)
Phillips screwdriver
Small level
3/32" hex key
(panel kits only)
11/32" nut driver
3/8" and 1/2" open-end
wrenches
5/32" and 3/16" hex key
1/4" and 5/16" socket
drivers
Tape measure
Utility knife
Tape (painters)
Appliance dolly
PARTS NEEDED:
#8 x 3" (7.6 cm) wood screws (longer screws may be
needed) (6)
2" x 4" x 32" (5 cm x 10 cm x 81 cm) wood boards (2)
Custom wood overlay panels—consult a qualified
cabinetmaker or carpenter to make the custom wood
panels. See “Custom Wood Panel Dimensions and
Installation Requirements” for more information.
Flexible, codes-approved water supply tubing, a
ferrule, a union and a 1/4" (6.35 mm) compression
fitting.
Slotted Hex-head Screw
W10141645 (21)
Hex-head Pointed Screw
W10141189 (8)
Hex-head Blunt Screw
W10142233 (4)
Shoulder Washer (use with
hex-head pointed screw)
W10471946 (4)
Phillips-head Flat Screw
8281252 (28)
Round-head Screw
1163283 (24)
Door Adjustment Pin
(preinstalled)
W10234194 (2)
Door Stop Pin
W10234202 (2)
Drawer Panel Bracket
W10606815 (2)
Standard Integrated Grille
Bracket
W10182743—Left (1)
W10182741—Right (1)
Fully Integrated Grille
Bracket
W10260890—Left (1)
W10260891—Right (1)
Filler Board “L” Bracket
W10234199 (2)
Panel Top Bracket
W10667450 (2)
Top Grille Lower Trim
W10634858—36" BM (1)
W10606812—42" BM, SxS (1)