Installation Manual

11
OVERLAY SERIES DOOR PANEL AND CABINETRY CLEARANCE
The custom door panels and adjacent cabinetry must be designed so that there is sufficient clearance for the doors to
swing open. If the refrigerator is to be installed close to the wall, see “Door Swing 90°” on next page.
1/2"
(3.8 cm)
1/4"
(3.2 cm)
1"
(2.5 cm)
Door Swing 110°
Actual Size
Refrigerator to
Cabinetry Clearance
Refrigerator
Side Trim
Cabinetry
Hinge
Overlay Panel
Backer Panel
Spacer Panel
Door
NOTE: Allow 1/2"
(1.3 cm) clearance
between overlay
panel and cabinetry.
NOTE: For overlay Series models, rout the hinge
side of the custom door panels to a radius that is
equal to atleast half the thickness of the panel if
a 130° door swing is desired. See "Adjust Doors."
1/4" (6.35 mm)
1/2"
(13 mm)
1/2" (13 mm)
3/4" (19 mm)
1" (25 mm)
1"
(25 mm)
1/4"
(32 mm)
1/2"
(38 mm)
3/4"
(19 mm)