Installation guide

RadiantD°wndraftC°°kt°pI JENN-AIR01
ModelJED8430 403WESTFOURTHSTREETNORTH.NEWTONA_020
INSTALLER - SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USE.
Installation should be performed only by an authorized Jenn-Air Service Contractor or other qualified installer.
Read Safety Precautions in the Use & Care Manual before using this appliance,
INSTRUCTIONS TO INSTALLER: Side Clearance - Unit may be safely installed as near as O" (0 cm) from a side wall
if space limitations requires. However, a side clearance of at least 6" (15.24 cm) is recommended for optimum ventilation.
NOTICE TO INSTALLER: Leave these instructions with the appliance.
NOTICE TO CONSUMER: Retain these instructions for future reference.
29 3/4 o
[75.27 cm]
22"
[55.88 cm]
28 7/8" _1/16 •
[73.05cm_.16 cm]
21 1/8" ±1/8"
[53.66cm±.32 cm]
10"
[25.40 cm] 44
CUTOUT
DIMENSIONS
SELECT APPROPRIATE
DUCT CUTOUT.
BLOWER MAY BE ROTATED
FOR HORIZONTAL OR
VERTICAL DIRECTION BY
LOOSENING NUTS AROUND
THE BLOWER INLET.
(SEE DUCTING INSTRUCTIONS,)
29 3/4 °
l € 5/8"
11.75cm
Min. Cleoronce l
Required
17 1/2 °
[44.46 cm]
1
2"[5.08 an] MIN_
MINIMUM CABINET
TO MOTOR CLEARANCE
FOR COOLING PURPOSE.
[75.27 cm]
LJ
12 1/2"
[31.76 cm]
1/2o._..,=
[31.75cm]
8101 P419-60
(01-03-01)