JENN-AIR® GAS ON DOWNDRAFT COOK TOP TABLE DE CAISSON A GAZ A ASPIRATION PAR LE BAS JENN-AIR® Use & Care Guide For questions about features, operation/performance, parts, accessories, or service in the USA, call 1-800-JENNAIR (1-800-536-6247) or visit our website at www.jennair.com. in Canada, call: 1-800-807-6777, or visit our website at www.jennair.ca. Guide utilization et detriment Au Canada, pour assistance, installation ou service, compose le 1-800-807-8777 ou visited note site web a www.jennairca.
TABLE OF CONTENTS COOK TOP SAFETY. PARTS AND FEATURES COOK TOP USE Cook top Controls Sealed Surface Boomers Surface Grates Downdraft Ventilation System Home Canning .. Cookware... COOK TOP CAR! General Cleaning TROUBLESHOOTING .. ASSISTANCE OR SERVICE In the TUBA Accessories In Canada WARRANTY TABLE DES MATTRESSES SECURITY DE LA TABLE DE CAISSON PIECES ET CHARACTERISTICS UTILIZATION DE LA TABLE DE CUISINE! Commanded de la fable de caisson Bridleways de surface cells Grilles de surface...
WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. WHAT TO DO IF YOU SMELL GAS: » Do not try to light any appliance. » Do not touch any electrical switch. » Do not use any phone in your building. » Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.
30" {76.2 cm) Control Panel 30° {76.2 cm) Cook top Left rear 9,200 Btu boomer B. Downdraft vent grille C. Right rear 12,500 Btu burner 0. Control panel PARTS AND FEATURES This manual covers different models, The cook top you have purchased may have some ot all of the items listed. A Surface boomer locator B. Left rear control knob ©. Right rear control knob D. Left front control knob E. Right tron control knob F. 3-speed vent fan control knob FE £. Right front 5,000 Buh burner F Right side grate G.
COOK TOP USE ws Cordelia WARNING aL ¢ Fire Hazard Do not let the burner flame extend beyond the edge of the pan. Turn off all controls when not cooking. Failure to follow these instructions can result in death or fire. Electric ignites automatically light the surface burners when control knobs are turned to Hl and will automatically reignite if the flame is extinguished. All ignites will spark when lighting; however, only the selected boomer will ignite.
Gas tube opening: Gas must flow freely throughout the gas tube opening for the boomer to light properly. Keep this area free of soil and do not allow spills, food, cleaning agents or any other alternate to enter the gas tube opening. Keep spillovers out of the gas tube opening by always using a burner cap. ote A T-WT" (25-38 mim) 8, Burner ports Burner ports: Check burner flames occasionally for proper size and shape as shown above, A good flame is blue in color. not yellow.
Ore Cord When canning for long periods, alternate the use of surface burners between batches. This allows time for the most recently used areas to cool. wm Center the caner on the grate above the bummer, w Do not place caner on 2 surface burners at the same time. m For more information. contact your local agricultural department. Companies that manufacture home canning products can also offer assistance. IMPORTANT: Do not leave empty cookware on a hot surface cooking area, element or surface burner.
m affresh® Kitchen and Appliance Cleaner Part Number W10355010 (not included): See “Assistance or Service” section to order. PORCELAIN-COATED GRATES AND CAPS Food spills containing acids, such as vinegar and tomato, should be cleaned as soon as the cook top, grates and caps are cool. These spills may affect the finish. To avoid chipping, do not bang grates and caps against each other or hard surfaces such as cast iron cookware. Dao not reassemble caps on burners while wet.
TROUBLESHOOTING Try the solutions suggested here first in order to avoid the cost of an unnecessary service call. Nothing will operate Surface burner flames are uneven, yellow and/or noisy {7 2 Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter, Do not use an extension cord. Failure to follow these Instructions can resell in death, fire, or electrical shock. Is the power supply cord unplugged? Plug into a grounded 3 prong outlet.
ASSISTANCE OR SERVICE Before calling for assistance or service, please check “Troubleshooting.” it may save you the cost of a service call, if you still need help, follow the instructions below. When calling, please know the purchase date and the complete model and serial number of your appliance. This information will help us to better respond fo your request. ne Usa If the problem is not due to one of the items listed in the “Troubleshooting” section...
JENN-AIR® COOKING APPLIANCE WARRANTY LIMITED WARRANTY For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or furnished with the product. Jenna-Air brand of Whirlpool Corporation or Whirlpool Canada LP (hereafter “Jenn-Air™} will pay for factory specified parts and repair labor to correct defects in materials of workmanship, Service must be provided by a Jenna-Alr designated service company.
Keep this book and your sales slip together for future reference. You must provide proof of purchase or installation date for in-warranty service. Write down the following information about your major appliance to better help you obtain assistance or service if you ever need it. You will need to know your complete model number and serial number. You can find this information on the model and serial number label located on the product.
SÉCURITÉ DE LA TABLE DE CUISSON Votre sécurité et celle des autres est trais importante. Nous donnas de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager. Assurez-vous de toujours lire tous les messages de sécurité et de vous y conformer.
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ AVERTISSEMENT : Pour séduire le risque d’incendie, de choc électrique, de blessures ou de dommages lors de Fiscalisation de la table de cuisson, if convient d’observer certaines précautions élémentaires dont les suivantes © = AVERTISSEMENT : NE JAMAIS utiliser cet appareil comme dispositif de chauffage de la pince. Le non-respect de cette instruction peut entraîner une intoxication au monoxyde de carbone et une surchauffe de la table de cuisson.
PIÈCES ET caractéristiques Ce manuel couvre différents modelés. La table de cuisson que vous avez achetée peut comporter tous les articles résumer ou seulement certain d’enfer eux, Tableau de commande de 30" {76,2 Repéré du habilleur de surface B Bouton da commande arriéré gauche C. Bouton de commande amarrer droit ©. Bouton da commande avant gauche E. Bouton de normande avant droit F.
Table de cuisson de 36" (81,4 cm} Jo4 Grille de girofle F. Tableau de commande G. Briseur central avant de 15 000 BTU HK. Rifle centrale 1. Brûleur avant gauche de 200 BRUN J. Grille de gauche A Brideur arriérer gauche de 5000 BTU B. Briseur central arriéré de 12 500 BY Uh ©. Griffe de ventilation & extraction par le bas D.
N'OUBLIEZ PAS : Quand Appareil est utilise, toute la surface de la table de cuisson peut devenir chaude. Panne de courant En cas de panne de courant prolongée. les briseurs de surface peuvent référer allumés manuellement. Tenir une allumette allumée prés d'un branleur et tourner le bouton dans le sens antihoraire & élevé. Une fols le briseur allume, tourner le bouton su réglage. Le ventilateur d'évacuation ne fonctionnera pas.
Les grilles doivent &tre correctement positionnées avant la cuisson. Les grilles doivent être en affleurement et de niveau pour &fre en bonne position. Une mauvaise installation des grilles peut entraîner I'écaillement ou I'éraflement de la table de cuisson. Afin de les positionner correctement. aligner les butoirs souples au-dessous de la grille avec les indentations sur la table de cuisson.
Ustensiles Caractéristiques Aluminium = Chauffe rapidement et uniformément. = Convient a tous les genres de cuisson, = Épaisseur moyenne ou forte convient le mieux pour la plupart des fâches de cuisson. Fonte = Chauffe lentement et uniformément. = Convient pour le brunissage et la friture. » Maintient Ia chaleur pour une cuisson lente. Céramique ou = Suivre les instructions du fabricant. vitrocéramique Chauffe lentement mais inégalement.
Méthode de nettoyage : m Tampon & récurer en plastique non abrasif et un nettoyant légèrement abrasif © Nettoyer dés que la table de cuisson, les grilles et les chapeaux ont refroidi. m Lave-vaisselle (grilles seulement, pas les chapeau) Utiliser le programme le plus intensif. wm Nettoyant pour la grille ef cuvette a gaz Épidote n® 316178 {non inclus) © Voir la section “Assistance ou service” pour placer une commande.
DÉPANNAGE Essayer les solutions suggérées ici d'abord afin d'éviter le colt d'une visite de service non nécessaire. Rien ne fonctionne Le briseur de surface fait des bruits d'éclatement 2 Risque de choc électrique Brancher sur une prise & 3 alvéoles relise a la terre. Ne pas enlever la broche de liaison a la terre, Ne pas utiliser un adaptateur. Ne pas utiliser un clébe de rallonge. Le non-respect de ces instructions peut causer un déesse, un incendie ou un chou électrique.
ASSISTANCE OU SERVICE Avant de faire un appel pour assistance ou service, veuillez vérifier la section “Dépannage”. Cette vérification peut vous faire économiser le colt d'une visite de service. Si vous avez encore besoin d'aide, suivre les instructions ci-dessous. Lors d'un appel, veuillez connaître la date d'achat et les énuméras au complet dir modelé et de la série de votre appareil. Ces renseignements ripous aideront & mieux répondre 2 votre demande.
GARANTIE DES APPAREILS DE CUISSON JENNY-AIR? GARANTIE LIMITÉE Pendant un an & compter de la date d’archal, lorsque ce gros appareil ménager est utilisé af entretenu conformément aux instructions Jointes & ou fournies avec le produit, Bien-aller, marque de Whirlpool Corporation ou Whirlpool Canada LP (cl-après désignées “Bien-aller) paiera pour les pièces spécifiées par I'usine et pour corriger les vices de matériaux ou de fabrication.