Installation Instruction

3. Apply the adhesive provided in the kit to the back side of the

brackets.

4. Position brackets in the center of the vertical centerline and

align the upper edge of the brackets so that they are flush

with the countertop.

5. Push the brackets firmly onto each side of the cooktop cutout

and wait 1 hour for adhesive to dry.

To Install Brackets into Wood Countertop:

1. Measure the center line of the vertical sides of the cooktop

cutout.

2. Position brackets in the center of the vertical centerline and

align the upper edge of the brackets so that they are flush

with the countertop.

3. Attach the brackets in the cutout with the screws provided.

Install Cooktop

1. Using 2 or more people, place the cooktop upside down on a

covered surface using the foam end posts from the

packaging.

2. Remove the foam roll from the package containing literature.

Apply foam adhesive-side down around the bottom of the

cooktop glass.

NOTE: The foam helps avoid damage to the underside of the

cooktop glass from debris and helps the cooktop sit flat on

uneven counters.

3. Lower the cooktop into the cutout with the front end of the

cooktop angled down.

1 h

Center line

A. Bracket

B. Screw

A. Cooktop base

B. Foam

C. Assembly glass

WARNING

Excessive Weight Hazard

Use two or more people to move and install cooktop.

Failure to do so can result in back or other injury.