Dimension Guide

JENN-AIR
®
DETAILED PLANNING DIMENSIONS
2 of 2
9000AdZw617
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air
®
appliances are appropriately UL, CUL or CSA approved.
15" MODULAR INDUCTION WOK
JIE4115GS – 15" x 5
7
⁄8" x 21"
OPENING/CLEARANCE DIMENSIONS
D* G
E
A
B
B
I
K
J
H
e
F
Side
Cabinet
C
D*
G
E
A
B
B
I
K
J
H
e
F
Side
Cabinet
C
D*
G
E
A
B
B
I
K
J
H
e
F
Side
Cabinet
C
MODEL # JIE4115GS
in cm
A
Width of combustible area above
cooking surface (min.)
15 38.1
B
Width from cooktop to fixed wall or
other combustible material (min.)
6 15.2
C
Width from center line of cutout to
junction box
9 23.0
D*
Height to bottom of uncovered wood or
metal cabinet above cooking surface (min.)
30 76.2
E
Height to bottom of uncovered wood or
metal cabinet (min.)
18 45.7
F
Height to top edge of junction box 12 30.5
G
Depth of upper cabinet 13 33.0
H
Depth from cutout to wall (min.) 2
5
⁄16 5.9
I
Width of cutout (recommended) 14
3
⁄8 36.5
J
Depth of cutout (recommended) 20
7
⁄16 51.9
K
Depth from cutout to front of countertop 2
5
⁄16 5.9
e
Recommended electrical access location
* Dimension can be reduced by 6" (15.2 cm) when bottom of wood or metal
cabinet is covered by not less than
1
⁄4" (0.6 cm) flame retardant millboard
covered with not less than No. 28 MSG sheet metal, 0.015" (0.4 mm)
stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
If installing a hood or microwave hood combination above the cooktop,
follow the hood or microwave hood combination instructions for
dimensional clearances above the cooking surface.
FRONT VIEW
ELECTRICAL REQUIREMENTS
A 240 Volt, 60 Hz, AC only 20-amp fused, grounded electrical circuit is
required. A time-delayed fuse or dedicated circuit is recommended.
Electrical connection should not be on a GFI circuit.
LOCATION REQUIREMENTS
• Allow 2" (5.1 cm) minimum clearance from bottom of cooktop base to
any obstruction below it.
• To ensure cooktop base clearance, cabinet side walls need to be wider
than the cutout.
• If cabinet has a drawer, allow a 5
1
⁄2" (14.0 cm) minimum clearance
between countertop and top of drawer.
TOP VIEWSIDE VIEW