Installation Instructions
Table Of Contents
- BUILT-IN OVEN SAFETY
- Installation Requirements
- INSTALLATION INSTRUCTIONS
- Sécurité de la table de cuisson
- EXIGENCES D’INSTALLATION
- INSTRUCTIONS D’INSTALLATION
- Préparation du four encastré
- Dépose de la/des porte(s) du four
- Réinstallation de la/des porte(s) du four
- Positionnement des pieds du four pour des ouvertures d’encastrement de hauteur différente
- Raccordement électrique
- Installation du four
- Installation de l’ensemble de déflecteur du tiroir-réchaud (uniquement pour les fours installés au-dessus d’un tiroir-réchaud)
- Achever l’installation
11
Cutout Height Is Between 50½" and 51¹⁄
8
"
(128.2 cm and 129.9 cm)
1. Using 2 or more people, place the oven on its back on a
covered surface.
2. Install a foot on the left rear spacer using a #8-18 x 3/8"
(9.5mm) screw.
NOTE: Position the foot, so the long side of the foot is facing
toward the top of the oven.
3. In the same manner, install a foot on the right rear of the
oven.
4. Install a front foot on the left front spacer using a
#8-18 x 3/8" (9.5mm) screw.
NOTE: Position the foot, so the long side of the foot is facing
toward the inside of the oven.
5. In the same manner, install a front foot on the right front
of the oven.
6. Using 2 or more people, place the oven in its upright
position.
7. Go to the “Make Electrical Connection” section.
A
B
C
A. Spacer
B. Foot
C. #8-18 x 3/8" (9.5 mm) screw
A
B
C
A. Front foot
B. #8-18 x 3/8" (9.5 mm) screw
C. Spacer