Owner's Manual
Table Of Contents
- OVEN SAFETY
- PARTS AND FEATURES
- BEFORE USING THE OVEN
- ELECTRONIC OVEN CONTROL
- OVEN USE
- Aluminum Foil
- Wire Shelf and Other Accessories, Shelf Guides, Sliding Runners
- Water Container
- Temperature Probe
- Oven Vent
- Assisted Cooking
- Cooking Modes - Steam
- Cooking Modes - True Convect
- Cooking Modes - True Convect+Steam
- Specialty Functions - Steam Defrost
- Specialty Functions - Steam Reheat
- Specialty Functions
- OVEN CARE
- TROUBLESHOOTING
- ASSISTANCE OR SERVICE
- SÉCURITÉ DU FOUR
- PIÈCES ET CARACTÉRISTIQUES
- AVANT D’UTILISER LE FOUR
- COMMANDE ÉLECTRONIQUE DU FOUR
- UTILISATION DU FOUR
- ENTRETIEN DU FOUR
- DÉPANNAGE
- ASSISTANCE OU SERVICE
5
BEFORE USING THE OVEN
IMPORTANT: Complete the following steps before oven is used
for the rst time.
1. Open the oven door, remove the accessories and make sure
that the oven is empty.
2. Rinse the water tank with tap water (no detergents) and then
ll it to the “MAX” mark with fresh tap water. Slide the water
tank into its compartment until it is rmly seated in place.
ELECTRONIC OVEN CONTROL
Control Panel
The control panel houses the control menu and function
controls.
The control keypads are very sensitive and require only a light
touch to activate.
For more information about the individual controls, see their
respective sections in this manual.
The functions described in this section will work only if the oven
is On. To turn the oven On, press POWER.
Display Navigation
If the oven is off, touch the Oven Power to activate the menu.
From this screen, all automatic cooking programs can be
activated, all manual cooking programs can be set, options
can be adjusted, and instructions, preparation, and tips can be
accessed.
Remote Enable
Press Remote Enable to enable the ability to use the JennAir
®
app. If Wi-Fi is not already enabled, the oven will attempt to
connect to a local network.
Display
The display is for both the menu and oven function controls.
The touch panel allows you to scroll through the oven menus.
The display is very sensitive and requires only a light touch to
activate and control.
When an oven is in use, the display will show the clock, mode,
oven temperature, kitchen timer, and oven timer, if set. If the
oven timer is not set, you can set it from this screen.
After approximately 2 minutes of inactivity, the display will go
into sleep mode and the display will dim. When the oven is in
operation, the display will remain bright.
During use, the display will show menus and the appropriate
selections for the options being chosen.
1 3
2 6
4 5 7
1. POWER
For switching the oven on and off.
2. HOME
For gaining quick access to the main
menu.
3. FAVORITES
For retrieving up the list of your
favorite functions.
4. DISPLAY
5. SETTINGS
To choose from several options and
aslo change the oven settings and
preferences.
6.REMOTE ENABLED
To ON or OFF the oven lamp.
Remote Enabled will be remote
control, use app to turn ON and OFF.
7. CANCEL
To stop any oven function except
the Clock, Kitchen Timer and
Control Lock.