Manual

Operating Your Mixer
1. Make sure the touda wheel control is SEI-TO "OFF" \
and the mixer is unplu_cd. _/
2. Press tile: mixer head release button and LIFT MIXER
HEAl) I_IR
3. INSERT AN _FTA(HMENT.
4. LO(K BOWL onto tile bo_l locking plate. ,'
/
g. LOWERTHE MIXER HEAl) by pressing the mixer
head relcase button and gui(ling the mixer head (lox_n
carefulh' with your hands. /
6. PLHG I)O\VER (ORI) into 3 prong electrical outlet.
7. THRN TOU(H WHEEL ( ONTROL until desired
setting is illuminated.
8. PRESS "START/STOP" BHTTON in center of wheel. The mixer will start
graduall)', to avoid spattering, and build up to tile selcct_d speed.
9. To 1ALISE, press tile start/st( p button again. The mixer will stop. To restart at
the same speed setting, simpl.v press "start/stop" again. The mixer will resume,
ramping up to the selected speed.
10. To (HANGE THE SPEEI), simpl.v turn tile touch xdlecl control until the
desired setting is illuminated.
11. To THRN MIXER OFF, turn the touch xdlecl control to "OFF." Hnplug the
pox_er cord fl'om tile clectrical outlet.
12. REMOVE ATTACHMENTS by pressing them up as tar as possible, then turn
countcrclockx_ise to release. Pull fl'om tile attachment post.