Use and Care

555
Side View (door open 90°)
Top View
Non-Overlay Models
Overlay Models
Custom Overlay Panel
Overlay Door Models Only
If you plan to install a custom overlay panel, you will need to
create the panel yourself or consult a qualified cabinetmaker or
carpenter. See dimension drawings for panel specifications.
IMPORTANT:
■ The thickness of the overlay panel must be ³⁄₄" (19 mm).
■ Overlay panel must not weigh more than 10 lbs (4.54 kg).
■ Overlay panels weighing more than recommended may
cause damage to your appliance.
Overlay Panel - Rear View
Create the custom overlay panel using the dimensions shown.
IMPORTANT: The following graphic shows a custom panel for a
door with the hinges installed on the right-hand side. If your
refrigerator has the hinges installed on the left-hand side, rotate
the custom panel 180° so the hinge markings will be on the left.
*Dimension includes Euro-series style handle
*Dimension includes ³⁄₄" (19 mm) thick custom door panel.
26¹⁄₈"
(664 mm)
47³⁄₄"
(1214 mm)
2
3⁷⁄₈"
(606 mm)
21⁵⁄₈"
(550 mm)
26"*
(660 mm)
23
7
/8 "
(606 mm)
23
7
/8 " *
(606 mm)
21
5
/8 "
(550 mm)
A. Drill holes using ¹⁵⁄₃₂ " (12 mm) drill bit to a depth of ¹⁄₂ " (13 mm)
before routing (4 holes total).
B. Drill holes using a ⁵⁄₁₆ " (8 mm) drill bit to a depth of ¹⁄₂ " (13 mm)
before routing (4 holes total).
C. Drill holes using a ¹⁄₈ " (2.8 mm) drill bit to a depth of ¹⁄₂ " (13 mm)
before routing (8 holes total).
D. Rout shaded areas to a
3
⁄₁₆ " (4.3 mm) depth.
E. Rout shaded areas to a
9
⁄₁₆ " (15 mm) depth.
F. Rout these small areas to a
7
⁄₁₆ " (11 mm) depth.
Reverse Side
17
15
/16"
(456 mm)
2
15
/16"
(74 mm)
30
3
/16"
(766 mm)
3
5
/16" (85 mm)
3
5
/16" (85 mm)
23
7
/16"
(596 mm)
23
3
/4" (603 mm)
/16"
6 mm)
1
1
/16"
(26.6 mm)
1
7
/8"
(47.5 mm)
2
3
/4"
(70 mm)
1
/2"
(13.5 mm)
2
3
/16"
(56 mm)
1
1
/2"
(38 mm)
4
7
/8"
(124.5 mm)
2
1
/4"
(57.5 mm)
2
11
/16"
(68 mm)
1
1
/4" (32.5 mm)
4" (102 mm)
1
/8"
(3 mm)
7
/16"
(11 mm)
1
3
/8"
(34.2 mm)
3
/8"
(9.5 mm)
A
E
F
B
D
C