Installation Instruction

DOOR REVERSAL
10 | DOOR REVERSAL
REMOVING HINGE COVERS
1
Remove the screws attaching top and
bottom hinge covers using the at head
screwdriver.
3
To remove hinge covers, cut hinge cover at
indicated point using diagonal cutting plier
and remove from hinges.
NOTE: Reinstall the hinge covers if product
is removed from cabinet installation.
2
Remove the hinge cover from top and
bottom hinges.
Top hinge cover
Bottom hinge cover
If door reversal is not needed, skip “Door Reversal” section and go to “Installation” section.!
Crush Hazard
Articulated hinges are self closing and many
pinch points exist prior to cabinet
installation.
Do not remove hinge covers until product is
ready to be installed.
Failure to follow these instructions can result
in crush, cut, or pinch injuries.
WARNING