Installation Instruction

DOOR REVERSAL
14 | DOOR REVERSAL
1
Once both hinges are removed, unscrew
the grill cover using a TORX T20
†
screwdriver.
NOTE: The grill cover may fall open. This is
normal.
5
4
3
2
11
PREPARING THE BOTTOM HINGES
†TORX and T20 are trademarks of Acument Intellectual Properties, LLC.
Hinge shim
Grill cover
Black screw cover
4
Place the black screw cover between the
grill and the screws. Install the hinge shim
on the opposite side, making sure the notch
face down and in.
NOTE: Be sure that all of the cover edges
are behind the lip of the grill, or it will not
stay in place.
3
To attach the black screw cover to the
opposite side, rst pull the grill cover out.
2
Remove the black screw cover from the
grill by opening the grill cover, pushing the
screw cap inwards, and sliding it out to the
side. Remove the hinge shim.