Installation Instruction

INSTALLATION
INSTALLATION
INSTALLATION | 19
4
Flush out tubing by placing the free end
of the tubing into a container or sink, and
turning on the main water supply until water
is clear. Turn off shut-off valve on the water
pipe.
IMPORTANT: Always drain the water line
before making the nal connection to the
inlet of the water valve to avoid possible
water valve malfunction.
6
Turn shutoff valve on. Check for leaks.
Tighten any connections (including
connections at the valve) or nuts that leak.
5
Remove and discard the short, plastic tube
from the end of the water line inlet. Thread
the nut onto the end of the tubing. Tighten
the nut by hand. Then tighten it with a
wrench two more turns. Do not overtighten.