Installation Instruction

INSTALLATION
INSTALLATION
INSTALLATION | 21
If Ice Maker is Currently Installed
NOTE: If ice maker is not installed, please proceed to
“Drain Pump Installation” section.
1
Press the OFF button to Stop ice
production. Then unplug the ice maker or
disconnect power.
3
If ice maker is built into cabinets, pull ice
maker out of the opening.
2
Turn off water supply. Wait 5 to 10 minutes
for the ice to fall into the storage bin.
Remove all ice from bin.
4
Unscrew the drain cap from the bottom of
the water pan located inside the storage
bin. Allow water to drain completely.
5
Disconnect water supply line.
Drain cap