Installation Instruction

INSTALLATION
22 | INSTALLATION
INSTALLING THE DRAIN PUMP
NOTE: Do not kink, smash or damage tubes or wires
during installation.
1
Unscrew the screws (7) attaching rear panel
to ice maker. Remove the rear panel.
2
Remove the old drain tube and clamp
attached to the ice maker bin.
NOTE: Discard old drain tube and clamp.
3
New drain tube (5/8" I.D. x 5
¹
⁄
8
") is provided
in the ice maker bin. Install new drain tube
to drain pump reservoir inlet using new
adjustable clamps.
NOTES:
■ Do not kink.
■ Trim tube length if required.
Screws
Clamp
7/8" adjustable hose clamp
7/8" adjustable hose clamp
Drain pump reservoir inlet
Drain tube (ice bin to drain
pump)
Old drain tube