Installation Instruction
INSTALLATION
INSTALLATION
INSTALLATION | 25
13
Place rear panel against the back of the ice
maker. Route drain pump discharge tube
and drain pump power cord, through the
slot provided on the ice maker back panel.
14
Connect ice maker to water supply and
install ice maker as specied by the
product installation instructions. Check all
connections for leaks.
16
Turn on ice maker. Wait for rinsing cycle,
approximately 5 minutes, to be sure the ice
maker is operating properly.
15
Plug in ice maker or reconnect power.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result
in death, fire, or electrical shock.
WARNING