Installation Instruction

INSTALLATION
INSTALLATION
INSTALLATION | 27
5
Install ice maker into cabinet. Push any
extra drain hose or power cord in the slot
provided on the ice maker back panel.
Follow the same procedure while placing
the unit back in the cabinets after servicing.
NOTE: Connections can be routed out from
both right and left sides. The illustration
shows the connections routed out from the
left side.
4
Using cable tie, x the drain pipe to rear
panel as shown in the illustration. Two holes
are provided on rear panel to x the cable
tie.
Cable tie
2
Style 1—For a gravity drain system, push
the ice maker into position so that the ice
maker drain tube is positioned over the
PVC drain reducer. See the “Gravity Drain
System” section.
Style 2—For a drain pump system, connect
the drain pump outlet hose to the drain.
See the “Drain Supply Requirements”
section.
3
Recheck the ice maker to make sure that it
is level. See the “Leveling and Securing”
section.