Installation Instruction

INSTALLATION
32 | INSTALLATION
CUSTOM WOOD DOOR PANEL
If stainless steel panel is installed, skip “Custom Wood Door Panel” section.!
4
Lightly press the custom panel onto the
door using double sided adhesive tape.
Adjust height of the panel to achieve a 1/8"
(3.175 mm) gap between top of door panel
and counter sealing gap. Press the panel
rmly against door.
2
Remove top and bottom end caps and
place aside.
1
Remove screws (3) from the top metal
bracket. Remove and place metal bracket
aside.
3
Reinstall top metal bracket using screws (3)
removed in Step 1.