Installation Instruction

INSTALLATION
INSTALLATION
INSTALLATION | 33
5
From inside the door, install the wood
screws (2) through the slotted holes in the
top metal bracket. Adjust the panel side
to side to achieve a 1/8" (3.175 mm) gap
on both sides. Install the remaining screws
through the door bracket into the panel.
6
Remove top metal bracket along with
custom wood panel from ice maker door
and place aside.
7
Replace the top end cap into the door
panel.
8
Reinstall the top metal bracket along with
custom wood panel on ice maker door.
9
From inside the door, install wood
screws (6) through the holes in the bottom
metal bracket.
10
Reinstall the bottom end cap.