User's Manual

Check the following list to be sure a service call is really necessary.

If the water won't drain: If the water temperature is incorrect:

• Isthe hosekinkedorknotted? • Is the WATER TEMP. SELECTION set correctly?

• ts the drain outletclogged? • Are the hoses connected to the correct faucets (hot to hot,

cold to cold)?

If the washer does not fill:

• Are the hot and cold faucets turned on?

• ts the electricatcord plugged in correctly?

• Is the water heater set correctly?

• Has a fuse blown or is the circuit breaker tripped?

If the washer does not spin:

• Have the controlsbeen properlyset?

• is the lid closed?

• ts the PauseIndicatorlit? If so,touch the START/PAUSE Pad,

• Is the electrical cord pLuggedin correctly?

• Turn off, let stand for 30 minutes then restarL Motor thermal

protector may have engaged. • Has a fuse blown or isthe circuit breaker tripped?

• Are the hot and cold water faucets turned on? If the washer is noisy:

• Are the hoses kinked or knotted? • Isthe washer level and firm to the floor?

• Are the hose filters clogged? • is the load unbalanced? (Excessive vibration can occur when a

load becomes unbalanced.)

if water is leaking:

If a power failure occurs during a cycle:

• Are the hose connectionstight at the faucets?

• Restartand use SPIN ONLY to drain the washer. Then, starta

• Is the end of the drainhosecorrectlyinserted in and securedto newcycle.

the drainfacility?