Installation guide

ManualsBrandsJenn-Air ManualsWarming DrawerOfficial Jenn-Air 30" electric built-in warming drawer

INSTALLATIONINSTRUCTIONS

24" (61 CM), 27" (68.6 CM), AND 30" (76.2 CM)

INDOOR/OUTDOOR ELECTRICWARMING DRAWER

INSTRUCTIONSD'INSTALLATION

TIROIR-RECHAUD ELECTRIQUEPOUR USAGE

INTI_RIEUR/EXTI:RIEURDE

24" (61 CM), 27" (68,6 CM), ET30" (76,2 CM)

Table of Contents/Table des mati_res

WARMING DRAWER SAFETY ...................................................... 2

INSTALLATION REQUIREMENTS ................................................ 3

Tools and Parts ............................................................................ 3

Location Requirements ................................................................ 3

Electrical Requirements ............................................................... 4

INSTALLATION INSTRUCTIONS .................................................. 5

Install Warming Drawer ................................................................ 5

Complete Installation ................................................................... 5

CUSTOM DRAWER FRONT INSTALLATION INSTRUCTIONS

FOR WARMING DRAWERS .......................................................... 6

Tools and Parts ............................................................................ 6

Install Custom Drawer Front Panel .............................................. 6

SI_CURITI_ DU TIROIR-RI_CHAUD ............................................... 7

EXIGENCES D'INSTALLATION ..................................................... 8

Outillage et pieces ........................................................................ 8

Exigences d'emplacement ........................................................... 8

Specifications electriques ............................................................ 9

INSTRUCTIONS D'INSTALLATION ............................................. 10

Installation du tiroir-rechaud ...................................................... 10

Achever I'installation .................................................................. 10

INSTRUCTIONS D'INSTALLATION DE LA FA(_ADE DU

TIROIR PERSONNALISI_ POUR TIROIR-RECHAUD ................ 11

Outillage et pieces ...................................................................... 11

Installation du panneau de la fa£;ade du tiroir personnalise ......11

iMPORTANT:

Save for local electrical inspector's use.

iMPORTANT :

,&,conserver pour consultation par I'inspecteur local des installations 61ectriques.

W10276326A

Summary of content (12 pages)

PAGE 1
INSTALLATIONINSTRUCTIONS 24" (61 CM), 27" (68.6 CM), AND 30" (76.2 CM) INDOOR/OUTDOOR ELECTRICWARMING DRAWER INSTRUCTIONSD'INSTALLATION TIROIR-RECHAUD ELECTRIQUEPOUR USAGE INTI_RIEUR/EXTI:RIEUR DE 24" (61 CM), 27" (68,6 CM), ET30" (76,2 CM) Table of Contents/Table des mati_res DRAWER SAFETY ...................................................... 2 SI_CURITI_ DU TIROIR-RI_CHAUD INSTALLATION REQUIREMENTS ................................................ Tools and Parts .......................................
PAGE 2
WARMING DRAWERSAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING.
PAGE 3
INSTALLATIONREQUIREMENTS Product Dimensions Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Tools needed • Phillips screwdriver • Drill • 13/8"(3.5 cm) hole saw C l Parts supplied • 4- #8-18 x %" screws • Lens (for panel ready models) Check local codes. Check existing electrical supply. See "Electrical Requirements." It is recommended that all electrical connections licensed, qualified electrical installer.
PAGE 4
Cabinet Front View oi E ¸ _ _,_ _ i'¸ _ o 120 volt grounded outlet (or located in adjacent cabinet) Electrical Plug into a grounded 21/(6.4 3 prong outlet. Do not remove ground cm) rain. Shock Hazard prong. Do not use an adapter. 91/8'' (23.2 cm) Do not use an extension Warming drawer Failure to follow these instructions fire, or electrical shock. ' (6.4 cm) rain. 91/8'' (23.2 cm) l ecommended 4114"(10.8 cm) Minimum 1" (2.5 cm) --T-(10.2 cm) WARMING DRAWER SIZE CUTOUT WIDTH (A) MIN.
PAGE 5
INSTALLATIONINSTRUCTIONS Excessive Weight 6. Open warming drawer and slowly push against the front panel to slide the drawer completely into the cabinet until the flanges on the front panel meet the cabinet face. 7. Use the two #8-18 x 5/8"screws provided to secure the warming drawer frame to the cabinet. Hazard Use two or more people to move and install warming drawer. Failure to do so can result in back or other injury. 1. Turn off power supply.
PAGE 6
CUSTOM DRAWERFRONTINSTALLATIONINSTRUCTIONS FORWARMING DRAWERS Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Tools Needed • Phillips screwdriver • Drill and appropriate bits Model A-MAX B-MAX A-MIN B-MIN 24" (60.96 cm) Warming Drawer 233/4" (60.3 cm) 10%e" (26.2 cm) 23" (58.4 cm) 9V_e" (23.0 cm) 27" (68.58 cm) Warming Drawer 263/4 '' (67.9 cm) 10%6" (26.2 cm) 26" (66.1cm) 9V_6" (23.0 cm) 30" (76.
PAGE 7
SECURITEDU TIROIR-RECHAUD Votre securite et celle des autres est tres importante. Nous donnons de nombreux messages de securite importants dans ce manuel et sur votre appareil menager. Assurez-vous toujours lire tous les messages de securite et de vous y conformer. de Ce symbole d'alerte de securite vous signale les dangers potentiels de deces et de blessures graves & vous et & d'autres.
PAGE 8
EXIGENCESD'INSTALLATION Dimensions du produit Rassembler les outils et pieces necessaires avant de commencer I'installation. Lire et suivre les instructions fournies avec les outils indiqu6s ici. Outillage n_cessaire • Tournevis Phillips • Perceuse • Scie a guichet de 13/8"(3,5 cm) C Pi_ces fournies • 4visn ° 8-18x%" • Cabochon (pour les modeles avec panneaux pr_ts-&-installer) Consulter les codes Iocaux. Verifier I'alimentation electrique existante. Voir "Specifications electriques".
PAGE 9
Vue avant du placard io Prise de 120V reli_e la terre (ou situ_e darts Risque de choc _lectrique un placard Brancher adjacent) 91/8" (23,2 cm) d_coup_es pour tiroir- le < Dimension 4" (10,2cm) de plinthe A B TAILLE DU TIROIRRI_CHAUD LARGEUR DE L'OUVERTURE (A) LARGEUR DU PLACARD (B) MIN.
PAGE 10
INSTRUCTIONSD'INSTALLATION d ss © 6. Ouvrir le tiroir-rechaud et pousser legerement contre le panneau avant et faire glisser le tiroir completement dans le placard jusqu'& ce que les rebords du panneau avant soient en contact avec la face du placard. 7. Utiliser les deux vis n° 8-18 x %" fournies pour fixer le cadre du tiroir-rechaud sur le placard. ®chc ud Risque du poids excessif Utiliser deux ou plus de personnes pour d_placer et installer le tiroir=r_chaud.
PAGE 11
INSTRUCTIONSD'INSTAI,LATION DE LA F ( ADE DU TIROIR PERSONNAUSEPOURTIROIR-RECHAUD Rassembler les outils et pieces necessaires avant de commencer I'installation. Lire et suivre les instructions fournies avec les outils indiques ici.