Manual

Product Dimensions
Interior=mounted blower motor model
Top trim widths:
_30V4" (76.8 cm) for 30" (76.2 cm) vent
36V4 (92.1 cm) for 36 (91.4 cm) vent
13W' (34.3 cm)
retractable
vent height
27" (68.6 cm) for 39" (76.2 cm) vent
33" (83.8 cm) for 36" (91.4
11/2" (3.8 cm)
(0.95 cm)
Terminam box cover
13" (33.0cm)
13" (33.0cm)
f
6" diameter
vent collar
(23.5 cm)
283/4,,
(73.0 cm)
Cabinet Dimensions
Interior-mounted blower motor model
_" (19.4 cm)
A= 1/2"(12.7 ram)
minimum
21%o"
(54.1 cm)
All cutouts are
for 6" (15.2 cm)
diameter vent
system.
Locate power
suppw Junction
pox a_lower
left hand
rear corner
of the cabinet.
Centerline of cooktop cutout
NOTES:
• See cooktop manufacturer's instructions for cooktop cutout
depth and width.
• Use dimensions for vent system cutout location that applies
to your installation.
• Interior mounted blower systems connect with 6" (15.2 cm)
round vent. The cutout locations for this vent system will
depend on your specific installation.
Countertop Cutout Dimensions
IMPORTANT: Countertops with a bull-nosed front edge are not
recommended for these installations.
• Some models require a countertop deeper than 25"
(63.5 cm); see the following Countertop Cutout Dimensions
section.
• To avoid mistakes, it is recommended that the cooktop and
vent cutouts be drawn on the countertop before making any
cutouts.
• See Cooktop Installation Instructions for complete cutout
dimensions, location dimensions and installation details.
-_-- D --_
B .... --,,L_c ----_,- --G
A. Downdraft vent
B. Cooktop
C. Measurement of eooktop rear
overhang.
D. D = Measurement of eooktop rear
overhang (C) + 11_,, [46.2 mm] (E)
A
!
E. 11_" (46.2 mm)
F. 7/2"(12.7 mm) minimum
G. ¼" (6.4 mm)minimum
H.Countertop and backsplash
I. 7/2"(12.7 mm) minimum
Countertop Cutout Dimensions
B
A. 7/2"(12. 7 mm) minimum to
backsplash or rear wall
B. ¾" (19.1 mm) maximum
backsplash depth
C. 27½" (69.9 cm) on 30" (76.2 cm)
models
33_" (85.9 cm) on 36" (91.4 cm)
models
D. D = Measurement of cooktop rear
overhang + 11_,, (46.2 mm)
6