Installation Guide

4
Installation Clearances
IMPORTANT: If installing a range hood or microwave hood
combination above the cooking surface, follow the range hood
or microwave hood combination installation instructions for
dimensional clearances above the cooktop surface.
Multi-Unit Dimensions
Units
Upper Cabinet
Width (C)
Cutout
Width (I)
One 15" (38.1 cm) unit 15"
(38.1 cm)
14
3
/
8
"
(36.5cm)
Two 15" (38.1 cm) units 30"
(76.2 cm)
29
3
/
8
"
(74.6cm)
Three 15" (38.1 cm) units 45"
(114.3 cm)
44
7
/
16
"
(112.9 cm)
Four 15" (38.1 cm) units 60"
(152.4 cm)
59
7
/
16
"
(151.0 cm)
30" (76.2 cm) cooktop and
one 15" (38.1 cm) unit
45"
(114.3 cm)
44
3
/
8
"
(112.7 cm)
30" (76.2 cm) cooktop and
two 15" (38.1 cm) units
60"
(152.4 cm)
59
7
/
16
"
(151.0 cm)
36" (91.4 cm) cooktop and
one 15" (38.1 cm) unit
51"
(129.5 cm)
50
3
/
8
"
(128.0 cm)
NOTE: After making the countertop cutout, some installations
may require notching down the base cabinet side walls to clear
the burner box. To avoid this modication, use a base cabinet
with sidewalls wider than the cutout.
If cabinet has a drawer, a 4" (10.2 cm) depth clearance from the
countertop to the top of the drawer (or other obstruction) in base
cabinet is required. The drawer depth may need to be shortened
to avoid interfering with the regulator and power cord.
Flush Installation Dimensions
All cooktops can be mounted with a frameless standard
installation sitting on top of the countertop surface or ush
with the top of the countertop. If the cooktop is to be mounted
ush with the countertop, a 11/64”(4.3 mm)-deep recessed
area surrounding the cooktop cutout must be provided with the
following dimensions.
NOTE: This option is not recommended for countertops with a
molded backsplash. Do not silicone seal in place.
Multi-Unit Flush Dimensions
Units
Recessed
Area Width (D)
Cutout
Width (C)
One 15" (38.1 cm) unit 15
1
/
8
"
(38.4cm)
14
3
/
8
"
(36.5cm)
Two 15" (38.1 cm) units 30
1
/
8
"
(76.5cm)
29
3
/
8
"
(74.6cm)
Three 15" (38.1 cm) units 45
1
/
8
"
(114.6cm)
44
7
/
16
"
(112.9 cm)
Four 15" (38.1 cm) units 60
1
/
8
"
(152.7cm)
59
7
/
16
"
(151.0 cm)
30" (76.2 cm) cooktop and
one 15" (38.1 cm) unit
45
1
/
8
"
(114.6cm)
44
3
/
8
"
(112.7 cm)
30" (76.2 cm) cooktop and
two 15" (38.1 cm) units
60
1
/
8
"
(152.7cm)
59
7
/
16
"
(151.0 cm)
36" (91.4 cm) cooktop and
one 15" (38.1 cm) unit
51
1
/
8
"
(129.9cm)
50
3
/
8
"
(128.0 cm)
IMPORTANT: If multiple units are installed side by side, the
mounting bridge kit W11031680 is needed for proper installation.
B
C
E
H
G
D
I
J
A
A
F
A. 18" (45.7 cm) minimum clearance upper cabinet to countertop
B. Cabinet
C. See the Multi-Unit Dimensions table.
D. 13" (33 cm) maximum recommended upper cabinet depth
E. 6" (15.2 cm) minimum side wall clearance
F. 30" (76.2 cm) minimum clearance between top of cooktop platform
and bottom of uncovered wood or metal cabinet (24" [61 cm]
minimum clearance if bottom of wood or metal cabinet is covered by
not less than 1/4" [0.6 cm] flame retardant millboard covered with not
less than No. 28 MSG sheet steel, 0.015" [0.04 cm] stainless steel,
or 0.024" [0.06 cm] aluminum or 0.020" [0.05 cm] copper)
G. 2
5
/
16
" (5.9 cm) minimum distance to rear combustible surface
H. 2
5
/
16
" (5.9 cm) minimum distance to front countertop edge
I. See the Multi-Unit Dimensions table.
J. Cutout depth - 20
3
/
8
" (51.8 cm)
D
C
A
B
E
F
E
Cooktop
Foam Strip
A. Recessed area length - 21
3
/
16
" (53.8 cm)
B. Cutout length - 20
3
/
8
" (51.8 cm)
C. See the Multi-Unit Flush Dimensions table.
D. See the Multi-Unit Flush Dimensions table.
E. Recessed area depth 11/64" (4.3 mm)
F. Recessed area radius 5/64" (2.0 mm) maximum