Operation Manual

19
Picture Mode Cycles through picture display modes: Standard, Dynamic, Soft, Personal.
Contrast Controls the difference between the brightest and darkest regions of the picture.
Brightness Controls the overall brightness of the picture
Color Controls the color.
Tint Controls the tint.
Sharpness Increase this setting to see crisp edges in the picture; decrease it for soft edges .
Color Mode Cycles through color modes: Normal, Cool, Warm.
hsilgnE
Setup
Lock
12
6
Time Pi cture Channe l
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color
Standard
Normal
Select Move Exit
MENU
50
50
50
0
50
Audio
HDMI CEC
HDMI CEC
Setu p
Lock
12
6
Time
Pi ct ur e
Chan ne l
SelectMo ve
MENU
Audio
CEC Mode
TV Auto Power
TV Auto Switch
Device Auto Standby
On
On
On
On
If you turn off the CEC Mode then the following items (TV Auto Power, TV Auto
Switch, Device Auto Standby) will not be used.
On - TV will turn on when compatible CEC device is activated
on HDMI connection.
TV Auto Switch On - TV will switch to HDMI inputs when compatible CEC device
is activated on HDMI connection.
Device Auto Standby
Customizing the PICTURE Settings
On - When the TV is turned off, any connected, compatible
CEC device will also turn off.
TV Auto Power
ReturnReturn
Mode
Select TV source for example. (Press SOURCE button to select TV mode)
1. Press the POWER button to turn the LED TV on
2. Press the MENU button on the remote control to display the Main menu, and use the LEFT and RIGHT
buttons to select the PICTURE.
3. Use the UP and DOWN buttons to highlight an individual PICTURE options, use the LEFT and RIGHT
buttons to change the setting, and press the MENU or EXIT button to exit.
The PICTURE menu includes the following options :
Application