Spec Sheet
SPECIFICATION SHEET
Architect
Engineer
Contractor
Submitted by Date
Location
Project
REMARKS QTY. REFERENCE
Granville
MEDICINE CABINET
FEATURES/TYPICAL SPECIFICATIONS
• Surface-Mounted Installation
• Two Integral Mounting Bars
• Pre-Drilled Mounting Holes (4 typical)
• Housing/Body is Panel Style Construction (WD)
• Particle Board Construction with PVC Laminate
• MDF Back Panel
• Dowel/Glue & Tongue & Groove Construction
• Solid Wood Frame with Miter Cut Corners
• Solid oak with Honey Oak Finish (OK01)
• The frame is attached to the top, bottom, and side panels of
housing by glue and tongue in groove or glue and wooden
dowels as a minimum.
• Mirror Doors (3 typical)
• Right-hand swing (2 typical) and left-hand swing (1 typical)
• Polished Edges, 4 sides
• Laminated Protective Mirror Backing
• Shelves, particle board with honey oak PVC laminate (2 typical)
• Fixed, non-removable (FX)
• Chrome finish glass pivot hinges, set of two (3 sets typical) (HG03)
• Spring-loaded, espresso magnetic touch latch fastened to cabinet
body aligns to chrome finished metal striker plate on the mirror door
back (3 typical)
• Polished edge mirror backed light fixture with satin nickel (NI4)
socket cups (4 typical). Uses four incandescent 60 watt maximum,
medium base, G style, 120V bulbs (I60G) - bulbs not included.
• Includes Mounting Hardware
CARB 93120 Phase 2 Compliant for Formaldehyde
S755403_B
Finishes:
Housing: OK01-Honey Oak
Mirror: POL1-Polished Edge
Frame: OK01-Honey Oak
Dimensions In Inches
Model # Description A B C** D E F
755403 MEDCAB 3DR 30X30 FMLS WD 30 30 4¾ 28½ 28-3/16 4
* All models and material specifications are subject to change or withdrawal without notice.
Rangaire Manufacturing Company, LP * 501 S. Wilhite Street, Cleburne, TX 76031
(1-800-325-8351) * www.rangairemfg.com
** Cabinet depth does NOT include light bulbs, socket cups, or the sockets.