software Manual

14
3.1.2 Setting the wavelength
To select the wavelength that the
zero calibration and sample
measurements will be performed at
type the wavelength into the text box.
If a value entered is outside of the
range of the spectrophotometer an
error icon will be displayed and this
must be corrected before the settings
screen can be exited. Only numeric
values can be entered.
3.1.3 Setting the resolution
The resolution of the absorbance
and % transmittance reported is
selectable between 0, 0.0, 0.00 or
0.000. Click on the arrow on the drop
down box to select the resolution
required.