software Manual

31
5.1.2 Setting start and end wavelengths
This function enables the start
and end wavelengths of the
spectrum scan to be set. To
select the wavelength range that
the baseline scan and sample
scan will be performed across
type the start and end
wavelengths into the text boxes. If
a value entered is outside of the
range of the spectrophotometer
an error icon will be displayed and
this must be corrected before the
settings screen can be exited.
Only numeric values can be
entered.
5.1.3 Setting the scan interval
This function enables the interval
between wavelengths measured
in the spectrum scan to be set.
The scan interval is selectable
between 1, 2 or 5nm. Click on the
arrow on the drop down box to
select the scan interval required.