software Manual

32
5.1.4 Setting the resolution
The resolution of the
absorbance or %
transmittance reported is
selectable between 0, 0.0,
0.00 or 0.000. Click on the
arrow on the drop down box
to select the resolution
required.
5.1.5 Selecting operating mode
The results displayed can be
either absorbance or %
transmittance. To select
absorbance click in the circle
adjacent to Absorbance; to select
transmittance click in the circle
adjacent to Transmittance.
After the spectrum scan is
completed it is possible to go
back and change the operating
mode. This will automatically
adjust the graph scale and the
results table.