software Manual

37
5.4.3 Spectral points analysis
The analysis area on the right-hand side of
the screen allows points of interest to be
selected from the graph and added to the
spectral points analysis table which can be
printed off. By clicking on a point of interest
on the graph the corresponding wavelength
and either absorbance or % transmittance
value is shown in the analysis area. By
clicking on the Add point to analysis selection
this adds the point to the table.
There is no limit on the number of points
which can be added to the table.
To view the points in the spectral points
analysis table click on the Analysis button on
the toolbar at the top of the page tab.
If a point has been selected in error highlight
the point to be deleted. Click the Delete key to
remove the point from the spectral points
analysis table.
The information displayed here can be printed
off. Refer to section 11 for more details on
printing options.