software Manual

43
6.1.4 Setting the resolution
The resolution of the absorbance
or % transmittance and
concentration reported is
selectable between 0, 0.0, 0.00 or
0.000. Click on the arrow on the
drop down box to select the
resolution required.
6.1.5 Operating mode
The results displayed can be either
absorbance or % transmittance. To
select absorbance click in the circle
adjacent to Absorbance; to select
transmittance click in the circle
adjacent to Transmittance.
Following sample measurement it is
possible to go back and change the
operating mode. This will
automatically change the results
displayed in the table.