User Manual

Concentration Calibrate to zero absorbance or standard
Concentration Factor menu
Concentration Standard menu
Concentration 001 Resets value to one
Concentration Check standard
Spectrum Scan settings menu
Spectrum Hand icon – Manual y-axis scaling
Spectrum Hand icon with cross through it - Auto y-axis scaling
Spectrum Scan interval
Spectrum Baseline scan
Spectrum Baseline scan in progress
Spectrum Scan sample
Spectrum Sample scan in progress
Spectrum Peaks and valleys threshold turned off
Spectrum Peaks and valleys above threshold 5% are shown
Spectrum Peaks and valleys table
Spectrum Show peaks only
Spectrum Show valleys only
Spectrum Spectral points analysis
Spectrum Double less than icon- decrease the wavelength by 10 times
scan interval
Spectrum Single less than icon - decrease the wavelength by 1 times
scan interval
Spectrum Double greater than icon - increase the wavelength by 10
times scan interval
Spectrum Single greater than icon - increase the wavelength by 1 times
scan interval
Spectrum Wavelength icon - manually enter the wavelength
Spectrum Add points to the spectral points analysis table
Spectrum View spectral points analysis table
Spectrum Data point interval – used in print setup
Quantitation Measure sample
Quantitation Quantitation table – Opens quantitation table
108