Use and Care Manual

4.0 Specifications for JWS-series Web Strap Hoists

Stock No.

352100 352105 352110 352115

Model No. JWS-2A JWS-25A JWS-3A JWS-4A

Single pull capacity (ton) 1 ton --- 1-1/2 ton ---

Single pull distance, minimum 20 in. (508mm) --- 21 in. (533.4mm) ---

Single pull distance, maximum 72 in. (1829mm) --- 73 in. (1854mm) ---

Double pull capacity (ton) --- 1 ton --- 1-1/2 ton

Double pull distance, minimum --- 25 in. (635mm) --- 26 in. (660.4mm)

Double pull distance, maximum --- 75 in. (1905mm) --- 76 in. (1930.4mm)

Minimum distance between hooks 13-1/2 in. 20 in. (508mm) 13-1/2 in. 21 in.

Webbing length 3M (9.8ft) 3M (9.8ft) 3M (9.8ft) 3M (9.8ft)

Webbing width 32mm (1-1/4in.) 32mm (1-1/4in.) 41mm (1-5/8in.) 41mm (1-5/8in.)

Handle length 325mm (12.8in.) 325mm (12.8in.) 380mm (15in.) 380mm (15in.)

Handle rotation 360 deg. 360 deg. 360 deg. 360 deg.

Handle effort (gear/leverage ratio) 1:1 1:1 1:1 1:1

Handle material fiberglass fiberglass fiberglass fiberglass

Hook swivel 360 deg. 360 deg. 360 deg. 360 deg.

Frame material carbon steel carbon steel carbon steel carbon steel

Hook material drop forged steel drop forged steel drop forged steel drop forged steel

Web strap material polyester polyester polyester polyester

Paint finish electroplated electroplated electroplated electroplated

Load control friction brake friction brake friction brake friction brake

Net weight 3.38kg (7.5 lb) 4.56kg (10 lb) 4.06kg (9 lb) 5.41kg (11.9 lb)

Table 2

Specifications in this manual were current at time of publication, but because of our policy of continuous improvement,

JET reserves the right to change specifications at any time and without prior notice, without incurring obligations.