Use and Care Manual

6
4.0 Specifications
Table 1
Stock number
577248 578248 577436 578436
Model number IBGB-248VS IBGB-248 IBGB-436VS IBGB-436
Motor and Electricals
Motor
Type
Induction,
with inverter
Induction,
capacitor start,
centrifugal switch
Induction,
with inverter
Induction,
capacitor start,
centrifugal switch
Horsepower 1HP
Phase single
Voltage 115/230V, prewired 115V
Cycle 60 Hz
Listed FLA (full load amps) 7 / 3.5 A 11 / 5.5 A 7 / 3.5 A 11 / 5.5 A
Starting capacitor n/a
200MFD,
125VAC
n/a
200MFD,
125VAC
Running capacitor
n/a
35µF, 250V n/a 35µF, 250V
Input power required
Single phase 115V (or single phase 230V if rewired)
On/off switch TACT toggle TACT toggle
Power transfer Direct drive
Power cord SJT 16AWG x 3C, 6 ft. (183cm)
Power plug provided 5-15P, 125V/15A
Recommended circuit size
1
15 A
Sound emission without load
2
75 dB at 3 ft. (92cm)
Grinding wheel and shaft
Arbor diameter 5/8 in. (16 mm)
Grinding wheel size (OD x W x Bore) 8 x 1 x 5/8 in.
Grinding wheel grit provided 36
Grinding wheel speed (RPM) 900~3600 3600 900~3600 3600
Grinding wheel material Aluminum oxide
Belt sander
Sanding belt size (L x W) 48 x 2 in. (1219 x 50.8 mm) 36 x 4 in. (914.4 x 101.6 mm)
Sanding belt grit provided 80
Belt speed (SFPM) 1178~4712 4,712 942~3769 3,769
Sanding belt material Aluminum oxide
Sanding table tilt 45 deg. down
Sanding table size 4-11/32 x 2-15/16 in. (110 x 75mm) 6-5/16 x 2-15/16 in. (160 x 75mm)
Tool rest tilt 45 deg. down
Tool rest size (L x W) 3-1/8 x 2-5/8 in. (79 x 67mm) 5-1/8 x 3-1/8 in. (130 x 80mm)
Drive wheel size (Dia. x W) 5 x 2-1/16 in. (127.5 x 53mm) 4 x 4-1/16 (102.5 x 104mm)
Dust port diameter 2 in. (50.8mm)
Recommended min. dust extraction 350 CFM
Dimensions
Foot print (W x D) 9-1/2 W x 8-1/16 in. (241 x 204.8 mm)
Overall
dimensions
(LxWxH)
Sanding bracket
vertical
21-1/4 x 12-9/32 x 25-29/32 in.
(539 x 312 x 658 mm)
23-7/32 x 12-7/32 x 20-3/4 in.
(590 x 310 x 527 mm)
Sanding bracket
parallel
21-1/4 x 24-3/4 x 13-15/16 in.
(539 x 629 x 354 mm)
23-7/32 x 19-1/2 x 13-15/16 in.
(590 x 496 x 354 mm)
Shipping dimensions (L x W x H)
26-9/16 x 24-19/32 x 16-15/16 in.
(675 x 625 x 430 mm)
21-15/32 x 24-19/32 x 16-15/16 in.
(545 x 625 x 430 mm)
Weights
Net weight
78 lbs.
(35.30kg)
77 lbs.
(35.02 kg)
77 lbs.
(34.95 kg)
76 lbs.
(34.65 kg)
Shipping weight
96 lbs.
(43.66 kg)
95 lbs.
(43.38 kg)
93 lbs.
(42.04 kg)
92 lbs.
(41.74 kg)