Use and Care Manual

6
Horizontal Band Saw
5.0 SPECIFICATIONS
Model Number EHB-916V EHB-1018V
Stock Number 891050 891060
Capacity (in.):
Round at 90° 9 10
Round at 45° 7 9
Rectangle at 90° 6 x 16 5 x 18
Rectangle at 45° 7 x 8 1/2 8 1/2 x 9
Vise Swivel 45° 45°
Blade Size (in.) 1 x 0.035 x 128 1 x 0.032 x 132 1/2
Blade Wheel Diameter (in.) 14 14
Blade Wheel Speed (SFPM) 50 - 275 Variable 50 - 275 Variable
Motor 1.5 HP, 115/230V, 1PH,
60 Hz, pre-wired 115V
2 HP, 230V, 1PH, 60Hz
Bed Height (in.) 27 27
Overall Dimensions (in.) 72 x 30 x 42 70 x 30 x 44
Net Weight - approx. (lbs.) 616 704
Shipping Weight - approx. (lbs.) 726 814
The specifi cations in this manual were current at time of publication, but because of our
policy of continuous improvement, JET, reserves the right to change specifi cations at any
time and without prior notice, without incurring obligations.
4.0 INTRODUCTION
This manual is provided by JET
®
covering the safe operation and maintenance procedures for a JET Model EHB-916V
and EHB-1018V. This manual contains instructions on installation, safety precautions, general operating procedures,
maintenance instructions and parts breakdown. Your machine has been designed and constructed to provide years of
trouble-free operation if used in accordance with the instructions as set forth in this document.
If there are questions or comments, please contact your local supplier or JET. JET can also be reached at our web site: www.
jettools.com. Retain this manual for future reference. If the machine transfers ownership, the manual should accompany it.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it
may result in serious or even fatal injury.
This means that if precautions are not heeded, it
may result in minor injury and/or possible machine
damage.