Operator Manual

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121255 – JLG Lift – 6-21
15. Platform Filter
Lube Point(s) - Replaceable Element
Interval - Change after first 50 hours and then every year
or 600 hours of operation thereafter
6.4 TIRES & WHEELS
Tire Inflation
The air pressure for pneumatic tires must be equal to the air
pressure that is stenciled on the side of the JLG product or
rim decal for safe and proper operational characteristics.
Tire Damage
For pneumatic tires, JLG Industries, Inc. recommends that
when any cut, rip, or tear is discovered that exposes sidewall
or tread area cords in the tire, measures must be taken to
remove the JLG product from service immediately. Arrange-
ments must be made for replacement of the tire or tire
assembly.
For polyurethane foam filled tires, JLG Industries, Inc. recom-
mends that when any of the following are discovered, mea-
sures must be taken to remove the JLG product from service
immediately and arrangements must be made for replace-
ment of the tire or tire assembly.
• a smooth, even cut through the cord plies which
exceeds 3 inches (7.5 cm) in total length
• any tears or rips (ragged edges) in the cord plies
which exceeds 1 inch (2.5 cm) in any direction
• any punctures which exceed 1 inch in diameter