Operator Manual

SECTION 4 - MACHINE OPERATION
4-14 – JLG Lift – 3121255
2. Disconnect drive hubs by inverting disconnect cap.
3. Reconnect the drive hubs by inverting the disconnect
cap when towing is complete.
4.12 SHUT DOWN AND PARK
To shut down and park the machine, the procedures are as
follows:
1. Drive machine to a reasonably well protected area.
2. Ensure boom is lowered over rear drive axle.
3. Push in the Emergency Stop at Platform Controls.
4. Push in the Emergency Stop at Ground Controls. Posi-
tion Platform/Ground Select switch to center OFF.
5. If necessary, cover Platform Controls to protect instruc-
tion placards, warning decals and operating controls
from hostile environment.
Figure 4-5. Drive Disconnect Hub