Instructions / Assembly

SAFETY / SELF-CLOSING SAFETY CABINETS
• Specified by the Safety Professional ~ Required by OSHA in the Workplace
• Meets requirements of OSHA 29 CFR 1910.106
• IFC Compliant
• Meets requirements of NFPA 30
SAFETY COMPLIANCE
JOBOX cabinets and cans comply with all applicable specifications set forth by the Occupational Safety and Health Administration (OSHA) and the National Fire Protection
Association (NFPA). JOBOX self-closing cabinets also comply with the International Code Consortium/International Fire Code (IFC). Compliance to these specifications has
been independently tested and listed by Underwriters Laboratories (UL) the internationally recognized third-party testing organization.
SAFETY CANS
• NFPA Compliant Container for Storage of Kerosine (Blue can) or Diesel (Yellow can)
• NFPA Compliant Container for Storage of Gasoline (Red can)
• Specified by the Safety Professional ~ Required by OSHA in the Workplace
• Meets ASTM F839/F926
Ensure the immediate area where the cabinet is
located is clear of debris and away from running
machinery or any activity involving heat. The floor or
decking beneath the cabinet should be solid and stable.
Ensure Material Safety Data Sheet (MSDS), whether
paper or electronic, for the liquid being stored is close
by and readily accessible.
Ensure shelves are clean and sit fully in the side wall
brackets.
Using a standard bubble level, verify that the cabinet is
level.
Verify that the cabinet sump is clean and empty. If
liquid or debris is found, ensure it is removed
immediately using approved procedures and properly
disposed of.
Verify that cabinet is locked and that only properly
trained and authorized personnel have access.
For self-closing cabinets, verify that fusible link
assemblies for all doors are properly installed and that
only OEM (from the original manufacturer) fusible links
are used.
Ensure contents of cabinet are organized so all
contents are visible and identifiable without moving
items out of the way. Verify that all containers in the
cabinet are properly closed and sealed.
Ensure cabinet is properly grounded to facility grounding
grid or earth source if applicable. Grounding is
mandatory if liquids are ever transferred from inside
the cabinet.
Verify that there is no debris accumulation underneath
the cabinet.
Verify that cabinet is properly vented if required. If
cabinet venting is not required, ensure cabinet is in a
well ventilated area and that venting caps are tightly
closed.
SAFETY STORAGE
STORAGE CHECKLIST
FLAMMABLE LIQUIDS
Frequent inspection is an extremely important aspect of safe flammable liquid handling and storage. Establish
a regularly scheduled visual inspection of every safety cabinet in your facility to verify compliance with all
applicable regulations. Do not become complacent. A little preventative work can go far in preventing a fire
hazard.
Periodically verify the following items for each cabinet in your facility and correct immediately if not in
compliance:
Ensure cabinet is the appropriate color for the liquid being stored.
FLAMMABLESPESTICIDES
INSECTICIDES
PAINTS
INKS
COMBUSTIBLES