Use and Care Manual

5. To check blade-to-mulch bafe clearance, rotate blades by hand. If
interference occurs, check that hardware is tightened.
OUMX068,0000D92-19-07MAR16
Install Shields, European Models Only (42 in. Accel
Deep™ Decks—X300 and X500)
NOTE: Hardware (B) is retained to shield with a push nut.
MXT014833—UN—19OCT15
1. Install right shield (A) with attached hardware (B).
2. Check for clearance between handle assembly (C) and shield.
3. If necessary, remove shield and cut away excess material.
OUMX068,0000D0D-19-07MAR16
Installing Label
MXT017166—UN—29FEB16
Place label (A) on mower deck as shown to provide visual indication of
door direction.
OUMX068,0000FBE-19-29FEB16
Installing Mower
(See Installing Mower section in Vehicle/Mower Deck OM.)
OUMX068,0000D95-19-07MAR16
Installation 48 Inch Accel Deep™
Decks
Parts In Kit
MXT014793—UN—21JUL15
Qty. Description
1 Handle, Mulch Control (A)
3 Blade, Mulch (B)
1 Spring (C)
1 Deector, Left (D)
1 Bracket, Spring Anchor (E)
1 Deector, Right (F)
1 Plate, Mulch Gate Stop (G)
1 Carriage Bolt, M8x25
2 Carriage Bolt, M8x20
3 Bolt, M8x20
1 Bolt, M6x20
6 Lock Nut, M8
1 Lock Nut, M6
1 Label, Operation
OUMX068,0000FBF-19-07MAR16
Installing Mulch Gate Stop Plate
CAUTION: Avoid injury! Machine component or attachment
is heavy. Use a safe lifting device or get an assistant to help
lift, install, or remove component or attachment.
NOTE: For ease of installation, place mower deck in the vertical
position.
NOTE: The following procedure is for the 48 in. MulchControl™ on a
Select Series™ mower deck. The installation procedure for other
machines with a 48 in. Accel Deep™ deck is similar.
Installation 48 Inch Accel Deep™ Decks
8