Use and Care Manual

CCoonntteennttss
Introduction.................................................... 2
Product Identication......................................... 3
Safety.......................................................... 3
Operating...................................................... 4
Preparing...................................................... 4
Installation 42 Inch Accel Deep™ Decks.................. 5
Installation 48 Inch Accel Deep™ Decks.................. 8
Installation 54 Inch Accel Deep™ Decks................. 11
Removing and Storing......................................13
Troubleshooting..............................................16
John Deere Quality Statement............................. 17
Index..........................................................18
Product Identication
Product Compatibility
The MulchControl kit is compatible with:
42 in., 48 in. and 54 in. Accel Deep™ decks for X300 models.
42 in., 48 in. and 54 in. Accel Deep™ decks for X500 models.
48 in. Accel Deep™ deck for X700 models.
42 in., 48 in. and 54 in. Accel Deep™ decks for ZTrak™ models.
OUMX068,0000CED-19-07MAR16
Record Purchase Information
Record your purchase information in the spaces provided below.
DATE OF PURCHASE:
_________________________________________
DEALER NAME:
_________________________________________
DEALER PHONE:
_________________________________________
OUMX258,0000CEA-19-03DEC13
Safety
Read Safety in Machine Operator’s Manual
Read the general safety operating precautions in your machine
operator’s manual for additional safety information.
OUMX068,0000265-19-22SEP13
Operating Safely
GXAL42347—UN—04MAR13
● Read the tractor and operator’s manual carefully. Be thoroughly
familiar with the controls and the proper use of the equipment. Know
how to stop the unit and disengage the controls quickly.
● Exercise caution to avoid slipping or falling, especially when
operating in reverse. Wear footwear that improves footing on
slippery surfaces.
● Inspect machine before you operate. Be sure that hardware is tight.
Repair or replace damaged, badly worn, or missing parts. Be sure
that guards and shields are in good condition and fastened in place.
Make any necessary adjustments before you operate.
OUMX068,0000A6A-19-10NOV14
Parking Safely
1. Stop machine on a level surface, not on a slope.
2. Disengage mower blades or any other attachments.
3. Lower attachments to the ground.
4. Lock the park brake.
5. Stop the engine.
6. Remove the key.
Original Instructions. All information, illustrations and specications in this
manual are based on the latest information available at the time of
publication. The right is reserved to make changes at any time without
notice.
COPYRIGHT © 2016
DEERE & COMPANY
Moline, Illinois
All rights reserved.
Previous Editions
Copyright © 2015
Contents
3