Use and Care Manual
Remove Shields, European Models Only (42 in.
Accel Deep™ Decks—X300 and X500)
NOTE: Hardware (A) is retained to shield with a push nut.
MXT014811—UN—24JUL15
1. Remove right shield (B).
MXT014812—UN—24JUL15
2. Flip shield over and cut out along markings (C) in the shield.
OUMX068,0000CFD-19-07MAR16
Remove Shields, European Models Only (X700)
NOTE: Hardware (A) is retained to shield with a push nut.
MXT014813—UN—29JUL15
1. Remove right (B) and left (C) shield.
2. Cut out along marking (D) in left shield.
OUMX068,0000CFE-19-07MAR16
Removing Discharge Blades
CAUTION: Avoid injury! Blades are sharp. Always wear
gloves when handling blades or working near blades.
Replace blades if defective. Never straighten or weld them.
1. Turn mower deck so underside is face up.
2. Insert wood block between blade and mower deck to prevent blade
from turning when removing bolt.
MXT012577—UN—22DEC14
3. Remove bolt (A), large washer, (B) and blade (C).
OUO2004,0000A9D-19-30JUL15
Installation 42 Inch Accel Deep™
Decks
Parts In Kit
MXT014792—UN—21JUL15
Qty. Description
1 Handle, Mulch Control (A)
2 Blade, Mulch (B)
1 Spring (C)
1 Bracket, Spring Anchor (D)
1 Deector (E)
1 Bracket, Gate Stop (F)
1 Plate, Mulch Gate Stop (G)
1 Carriage Bolt, M8x25
3 Carriage Bolt, M8x20
2 Bolt, M8x20
2 Screw, M5x16
Installation 42 Inch Accel Deep™ Decks
5