Use and Care Manual

Qty. Description
6 Lock Nut, M8
2 Lock Nut, M5
1 Label, Operation
OUMX068,0000FBD-19-07MAR16
Installing Mulch Gate Stop Plate
CAUTION: Avoid injury! Machine component or attachment
is heavy. Use a safe lifting device or get an assistant to help
lift, install, or remove component or attachment.
NOTE: For ease of installation, place mower deck in the vertical
position.
NOTE: The following procedure is for the 42 in. MulchControl™ on a
Select Series™ mower deck. The installation procedure for other
machines with a 42 in. Accel Deep™ deck is similar.
MXT014820—UN—19AUG15
Picture Note: Discharge chute removed for clarity.
1. Position stop plate (A) as shown.
2. Install stop plate to metal chute (B) and toe guard (C) with two
M8x20 carriage bolts (D) and two M8 lock nuts.
3. Tighten lock nuts.
Specication
M8 Lock Nut—Torque. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 N·m
15 lb·ft (177 lb·in)
OUMX068,0000D00-19-07MAR16
Installing Deector
CAUTION: Avoid injury! Machine component or attachment
is heavy. Use a safe lifting device or get an assistant to help
lift, install, or remove component or attachment.
NOTE: For ease of installation, place mower deck in the vertical
position.
NOTE: The following procedure is for the 42 in. MulchControl™ on a
Select Series™ mower deck. The installation procedure for other
machines with a 42 in. Accel Deep™ deck is similar.
MXT014816—UN—27JUL15
1. Install deector (A) to mower deck using M8 lock nut (B) on
threaded stud (C).
2. Install deector to gutter (D) with M8x25 carriage bolt (E) and M8
lock nut.
3. Tighten lock nuts.
Specication
M8 Lock Nut—Torque. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 N·m
15 lb·ft (177 lb·in)
Installation 42 Inch Accel Deep™ Decks
6